Low Pressure Die Casting Machine
| Max mould size | 1,200 × 1,000 mm |
|---|---|
| Crucible capacity | 800 kg |
| Part weight range | 3 - 80 kg |
Equipment
Casting, machining and inspection equipment all in place, with critical testing owned in-house.
Casting Machines
Gravity Die Casting Machine (Tilt-pouring)
| Max mould size | 1,000 × 800 mm |
|---|---|
| Tilt angle | 0 - 90° |
| Part weight range | 2 - 60 kg |
Machining
CNC Machining Centre
| Table travel | 1,000 × 600 × 600 mm |
|---|---|
| Positioning accuracy | ±0.008 mm |
| Spindle speed | 8,000 rpm |
Inspection
X-Ray Testing Room
| Tube voltage | 160 kV |
|---|---|
| Detectable thickness | ≤ 60 mm |
| Defects covered | Porosity / shrinkage / inclusions |
Coordinate Measuring Machine (CMM)
| Measuring range | 1,200 × 1,000 × 800 mm |
|---|---|
| Indication error | (2.8 + L/300) μm |
| Application | Full dimension & GD&T inspection |
Other Laboratory Equipment
| Spectrometer | In-process chemistry check |
|---|---|
| Leak testing | To customer pressure spec |
| Mechanical | Hardness / tensile |
Note: machine models and parameters are sample data. Replace them with real nameplate data before launch.
Quality control
- Real-time X-ray inspection, per piece or AQL sampling
- In-process spectrometer chemistry check
- CMM full dimension and GD&T inspection
- Leak testing to customer pressure specification
- Hardness and tensile mechanical testing
- Reports shipped with goods, traceable to heat number
Send us your drawings, get a reply within 24 hours
Build-to-print, sample development and factory audits are all welcome.
Contact us